Plus 1030W hybrid kit

Two 515W panels on a hybrid stand. It needs about 2.5m by 2.2m of sunny ground.

2.5m by 2.2mspace needed
2 × 515Wpanels
Up to 800Winto your home

Two big panels
Electrics check suggested
On the ENA register

Your kit

One per home

Coming soon

Plus 1030W, hybrid mount: Price TBC
Delivery to your door: TBC
Total: TBC

Not on sale yet. Join the list and we'll email you when you can order.

What you get

2 × 515W TOPCon N-type panels (bifacial, glass-glass)
1 × APsystems EZ1-M 800W microinverter
Hybrid aluminium mounting frame with ballast brackets, for a wall or the ground
4m AC cable

Concrete blocks or other ballast aren't in the box.

Where it goes

Use it on level, sunny ground about 2.5m by 2.2m.

On the ground, the stand is held down with ballast, such as concrete blocks. The right amount for this stand depends on your spot and the wind there. Ask us and we'll get the maker's figure for you before you set up.

The stand can also go on a house wall, a flat roof or somewhere raised. That needs a professional assessment first. We don't offer one, so the ground is the simple choice. Never on a balcony, and never on a wall you share with a neighbour.

Have your electrics checked first

This kit has more than 960W of panels. The government's product rules say to think about a professional check of your home's electrics above that. So have one done before you plug it in.

Before you order

Can you tick all of these? If not, ask us first.

A sunny spot about 2.5m by 2.2m, on level ground.
A weatherproof outdoor socket within reach of the 4m cable. No extension leads or adaptors.
Modern RCD protection in your fuse box. Not sure? An electrician can check it, or fit the outdoor socket.
Renting, or leasehold? Get written permission from your landlord or freeholder first.
Tell your home insurer you've got it.
Register it free at myplugin.solar before you first switch it on.
One kit per home. Never use it with a home battery.
Want it on a wall, a flat roof or somewhere raised? That needs a professional assessment first.
More than 960W of panels: have a professional check your electrics first.

Full specs

Show all 16 specs

Panel power: 2 × 515W (1030W)
Output into your home: Up to 799VA (3.5A), 230V 50Hz
Panels: TOPCon N-type mono, 108 cells per panel, 23.2% efficiency, bifacial glass-glass
Panel size: 1960 × 1134 × 30mm each
Panel weight: 27.5kg each (55kg for both panels)
Space needed: About 2.5m × 2.2m (about 5.5m²)
Microinverter: APsystems EZ1-M 800W microinverter, 2 MPPT, 96.7% peak efficiency, IP67, Wi-Fi and Bluetooth app
Mounting: Hybrid aluminium mount, wall or ground (expansion bolts or ballast). Professional assessment for any install that isn't on the ground. Not suitable for balconies
Cable: 4m AC cable
Plug type: Factory-fitted, moulded and fused UK plug (BS 1363). Don't cut it off or rewire it
Box: 1990 × 1165 × 240mm, 81kg
Fire rating: Class C
Standards: BS EN 50549-1, BS EN 62109-1, BS EN 62109-2, EN 755-1, EN 755-2
Where it's made: China
ENA Type Test Register: Listed as Compliant (0.8kW, single phase)
Manufacturer's warranty: 10 years on the panels and on the mounting stand. The APsystems microinverter has its own manufacturer's warranty. Cables, connectors and accessories: 2 years

From the maker's datasheet (September 2026).

Delivery and returns

We bring it to your door in England, Scotland or Wales. The box is 1990 × 1165 × 240mm, 81kg, so have two people ready to carry it.

You can cancel any time before it's sent, and for 14 days after it arrives. Unless it's faulty, you pay to send it back. Keep the box until you're sure.

Our delivery page has the box sizes for every kit.